No power to coil

[mactat2]

Hi Guys,
Figured it was time to do some work on my magnum the weekend, however I don't seem to be getting power to the coil? Typically it started fine last month but now nothing. I've checked the fuses and fuse box, cleaned the connections etc but still nothing. Any suggestions where else to check?

cheers
Mac

[droopsnoot]

You could check around the ignition switch and see if there's an issue there. Other than that, just work backwards along the circuit until you find current. I take it you have a Haynes manual with the circuit diagram in it? Are the fusible links OK?

[mactat2]

Got a haynes so have had a look at the diagram, i'll check the switch tonight hopefully its that.