New Front End

Do you need help with your bodywork, Help is at hand

New Front End

Postby hutchimr » Wed Jan 04, 2006 11:01 am

Has anyone ever put a complete new front end on an HB? I have a new valance, inner panel and slam panel and wanted to know of any problems people have had, before I attempt to put mine on.
hutchimr
De Luxe Viva
De Luxe Viva
 
Posts: 18
Joined: Mon Oct 31, 2005 1:25 pm
Location: Hemel Hempstead

HB front end

Postby northern nutter » Sun Jan 08, 2006 10:42 pm

There is the front panel / inner front panel / and slam panel
If you look in the Haynes manual you will see what i mean.
I have done inner and outer wings plus striped the front of but i am replacing the front pannel with fiberglass.
Not a har job to do just grinned of the spot welds.

Good luck
User avatar
northern nutter
 

Fiber Glass avaible here

Postby pbottomley » Sun Jan 08, 2006 10:45 pm

Phil or Barry....0191 2669846
Give them a call they have wings in stock at silly prices
User avatar
pbottomley
 

Not glass

Postby hutchimr » Mon Jan 09, 2006 2:02 pm

Thanks Guys

Have all the front off and have all three new panels to go on, (metal). Have put new nearside inner wing on but have left both outer wings on for reference point. Has anybody done this and found a good way or an bad way not to follow.

I was going to next put three front end panels on then the nearside outer then remove and replace the offside two wings!

Any better ideas very welcome.

Mike
hutchimr
De Luxe Viva
De Luxe Viva
 
Posts: 18
Joined: Mon Oct 31, 2005 1:25 pm
Location: Hemel Hempstead


Return to Bodywork

Who is online

Users browsing this forum: No registered users and 10 guests

cron