To fix some bodywork issues I removed the rear hatch hinges from my Sportshatch, and completely forgot to make a note of where the spacers fit. I *think* the thick washers go between the hinge and the mounting plate on the two rearmost bolts, with the forward section bolting flush to the mount. But if anyone has access to a HC with the hinge cover removed, I'd be grateful for confirmation.
Problem is that having re-fitted the tailgate to check the shape of the roof section that I've repaired, and make sure the roof contour is about right, I now find that the front edge of the hatch is about 8mm above the roof when closed and I'm struggling to visualise how to adjust it downwards. I could put more spacers in, but it's puzzling why I need to.