Fuel filler rubber specs

Do you need help with your bodywork, Help is at hand

Fuel filler rubber specs

Postby Stu » Wed Jun 12, 2019 8:08 pm

Hi all,

Following discovery of a leak from the rubber seal joining the fuel filler and the tank on my '71 Firenza, I'm wondering if it's as simple to fix as replacing with a new section of rubber hose of correct bore and appropriate clamps, or is it more specialised than that?!

It's the red rubber, as pictured in this ebay sale photo (not my pic)...
Image

Any advice welcome! Thanks in advance
Stu
1971 1159cc Vauxhall Firenza
Stu
SL Viva
SL Viva
 
Posts: 77
Joined: Thu Nov 02, 2006 9:31 pm
Location: Ramsgate, Kent, UK

Re: Fuel filler rubber specs

Postby 1972nail » Wed Jun 12, 2019 11:28 pm

I did have a stock of replacement ethanol fuel safe silicone hose. It's an odd imperial size and had to be specially ordered in. Unfortunately I don't have any left. I'll check the price of a new batch and get back to you.

If you are a paid up member you can view this thread.

viewtopic.php?f=53&t=24049&hilit=fuel

The price quoted may no longer be valid, I'd need to check.
Editor of the VVOC Magazine ReVival

"When you have a Firenza like mine, who needs any Minis?" copyright David Maxwell 1979.
User avatar
1972nail
Old Nail
Old Nail
 
Posts: 3185
Joined: Sun Aug 07, 2011 4:16 pm
Location: Ballymoney Co Antrim - some say....the World's best place to live!

Re: Fuel filler rubber specs

Postby droopsnoot » Thu Jun 13, 2019 9:51 am

Yes, the bore is a weird one, and you need to keep in mind that once you have the tank above something like half full, fuel will sit in that pipe all the time. So a bit of pipe suitable for pouring fuel through might not be suitable - I talked to someone age ago about a section of suitably-sized pipe from a different vehicle, but as theirs sat just behind the filler hole way above the tank, it wasn't intended to have fuel in it all the time.
droopsnoot
Old Nail
Old Nail
 
Posts: 2121
Joined: Mon Oct 31, 2005 2:08 pm
Location: Cheshire

Re: Fuel filler rubber specs

Postby Stu » Thu Jun 13, 2019 11:10 am

Thanks both, for the information!

I'd be very interested if you could source some modern silicone equivalent of correct bore. Unfortunately I cannot view that old thread as my membership lapsed towards the end of last year.

droopsnoot wrote:keep in mind that once you have the tank above something like half full, fuel will sit in that pipe all the time.
Yes I had just filled the whole tank when I discovered the contents slowly dribbling back onto the garage forecourt! Luckily I wasn't far from home and dashed back where I was able to stem the flow by tightening the clamp a little. Rubber is definitely shot though and want to replace before it starts leaking again!
Stu
1971 1159cc Vauxhall Firenza
Stu
SL Viva
SL Viva
 
Posts: 77
Joined: Thu Nov 02, 2006 9:31 pm
Location: Ramsgate, Kent, UK


Return to Bodywork

Who is online

Users browsing this forum: No registered users and 5 guests

cron