Rusty Bumper Bolts, Help!

[shamm]

Went to unbolt the bumper mounts to remove from current resto project (HC). The small bolt headed tapper screws which hold the ends of the bumper just smeared into a circle.

These bolts are tucked into the corner of the front panel and wing, anybody have a good idea how I get them out ?
Don't think there is room for the grinder and using a hacksaw blade is going to take forever.

[pbottomley]

Try a pair of plyers on them, from inside the wing

[edgoose1]

I had this problem. I used a Dremel and ground the end of the bolt off. They are also good to make a slot on the end of a bolt so you can use a screwdriverto I

[Pork Pie]

mole grips lad. or you know me i`ll cut the sodding wing off (which does`nt help if you still want the wing)