by Mike Attew » Wed Jul 11, 2018 3:28 pm
Rechecked carb and also changed the coil, still the same like a handbrake being pulled on when I slow for a speed zone.
I still thought it was fuel and a photo I had seen from Lord13 about throttle linkage started niggling me, I found the later breather hoses were only one length, mine had a take off which I connected to a connector on the manifold which I now presume was for a servo, went back to Lord13 photo with the blanking bolts, blanked mine off and it seems to be cured, must have been loosing vacuum which allowed the stromberg piston to close and cutting fuel.
Just a simple thing.
Mike