Page 1 of 1
Torque Setting
Posted:
Mon Feb 11, 2019 11:02 pm
by vauxhallbitz
Is there a torque setting for the flywheel bolts on a 1256 engine, I can't find one in the manual?
Re: Torque Setting
Posted:
Tue Feb 12, 2019 2:02 am
by thomas
Burning the midnight oil?
My HB (1159) manual gives 25 lb/ft (34Nm)
Chevette manual (1256) gives 30 lb/ft (41 Nm)
with a smidgeon of lock/sealer compound applied to the bolts mid-thread (neither at the end nor the head)
assuming clean, dry oil-free threads
owing to the lubricity of the wet sealant, I'd aim for slightly under the specified torque.
p.s. To convert lb/ft to Nm multiply by 1.356. To convert Nm to lb/ft multiply by 0.738.
Re: Torque Setting
Posted:
Tue Feb 12, 2019 6:02 pm
by vauxhallbitz
Yes trying to get the car back on the road for Spring, thanks for the information!