Page 1 of 1
1256 Clutch adjustment
Posted:
Sun Apr 14, 2019 11:04 pm
by vauxhallbitz
Any tips on adjusting my new clutch, I tried the Haynes manual method by turning the bearing until it goes solid and then slackening off but the pedal is very high.....
Re: 1256 Clutch adjustment
Posted:
Mon Apr 15, 2019 4:30 pm
by 1972nail
Is there a stop rubber buffer on the pedal box? It may be missing..... The pedal may be dropped a bit by fitting a hardwood or metal spacer inside the pedal box, then adjusting the cable as per the Haynes manual. I believe some people have made up and fitted a pedal height adjuster bolt which acts as a stop for the pedal.
Re: 1256 Clutch adjustment
Posted:
Mon Apr 15, 2019 11:45 pm
by vauxhallbitz
Thanks for that, will have a look.
Re: 1256 Clutch adjustment
Posted:
Tue Apr 16, 2019 9:37 am
by droopsnoot
Some later cars have a spring to keep the pedal down, though it must be coupled with an "always-touching" release bearing as it maintains tension in the cable.