Fuel pump Blanking plate
Posted:
Mon Oct 23, 2023 8:07 pm
by maximus
Is there a blanking plate you can get for the fuel pump on a 1256 ?
Thanks Gary
Re: Fuel pump Blanking plate
Posted:
Tue Oct 24, 2023 8:14 am
by droopsnoot
I don't know about the OHV engine, but when I converted my Sportshatch to have an electric fuel pump I just made one from a bit of suitable steel, using the gasket as a template to get the holes in the correct place.
Re: Fuel pump Blanking plate
Posted:
Tue Oct 24, 2023 10:34 am
by maximus
Yes thanks I thought about going down that route
Re: Fuel pump Blanking plate
Posted:
Thu Oct 26, 2023 8:03 pm
by benjarny1
https://www.ebay.co.uk/itm/300266071185 ... media=COPYI used one of those with some gasket paper, everything lined up perfectly and hasnt leaked a drop
This was on a 1256
Re: Fuel pump Blanking plate
Posted:
Mon Oct 30, 2023 4:39 am
by caribougone
I have an 1159 and I used a blanking plate for a Mini/Minor/MGB/Sprite etc. BMC part number 2A265. I suppose fuel pumps had a common design across many manufacturers because it was a perfect fit.
My old mechanical fuel pump was kaput so I fitted an electric pump and blanked off the hole on the engine. I really like having the electric one as the car now starts immediately, even after sitting for weeks.
cheers,
Ben