vauxhallviva.com

Anyone know where the chrome headed bolts for the bumper can be sourced ?

NAMRICK The nut and bolt store have a good range.

www.namrick.co.uk

Cheers,
Alan.

Yes, Namrick have a selection but which ones fit an HC?

https://www.namrick.co.uk/acatalog/Home ... s_121.html

The parts book says the nut is 1/4" - 20, which I think makes it UNF. But unless the photos are wrong, the "collar" on the bolt doesn't seem to be the correct square-section that the Viva bumper has. It might just be the photo, though.

You do see them at autojumbles and the like. I bet I'll see some at Race Retro this weekend if I can make it.

I thought the photo looked incorrect as well......

Keep an eye out for me please if you get to Race Retro !!

The one in the top left of the photo here looks like it might be about right: https://www.spaldingfasteners.co.uk/chr ... r-bolts-4/

Hi Alan,

I contacted Namrick but they don't offer anything with the square head like I need for the HC. Thanks for your suggestion though.

Ethan

Yet to contact spalding fasteners but i'll check them out. Thanks mike !!

Photo looks correct on the top left

I used the 1/4" unf x 1" from Nanwick. They actually have 2 flats on them so I just filed another 2 flats for them to fit. The heads are smaller than the original rear bumpers though.

I got some metric (aargh) M6 x 16mm ones on ebay (seller: kayfast1), with washers and nyloc nuts all in A2 stainless.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 2448545582

also available with plain nuts:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 2514755441

Just need to find the bumper brackets (HB front centre ones) I've lost since dismantling them, or replacement ones.