1972 Vauxhall Firenza Restoration and modification

This is an area for discussion about Restoration issues.

1972 Vauxhall Firenza Restoration and modification

Postby Icedmunkie » Sun Jan 08, 2012 12:56 am

After buying this about 2 years ago, I used it daily for about a year and half, it only cost £14 for it too pass then £400 too weld all the sills and floor after some poking revealed the pants fiberglass repairs previously. I felt at the time that I should have just called it quits but I didn't I carried on buying bits here and there till one day on the Fens my passenger rear wheel decided to part company with the axle on a cold dark rainy night about 160 miles from home, (I was loaded up with viva parts too, seats, 6wheels and alloys, etc you get the picture) luckily it happened where it happened as a couple of miles was a motorway and a few miles behind us were no verges just dykes either side, so after sliding to a grassy halt I got recovered to the garage I was working in atm the time. I then put one of the other wheels on and drove it too a friends, where it sat awating a back axle or studs, whichever came first, unfortunatly neither did and it sat there looking forlorn whilst life carried on around it but I knew i wanted too get it back on the road, but had nowhere really to do a good job. Then I moved away to Rutland which was a good 3 hours away so no more work but shortly after it arrived and this is how it is now:

So here are some pictures:

Image
Wedding duties as best man!

Image
One of the original pictures from the Ebay advert

Image
The sills after the MOT (it had passed at this point!!!)

Image

Image

Image
Out in Littlehampton, with a friend of mine in his Capri (this coincidentally is being rebuilt with a big Ford V8, fitted)

Image
After the wheel coming off, I think the bolt holding the drum on stopped things going even worse... as it skidded on this rather than the backplate and bodywork

Image
Engine out

Image
Different twist on Houses type 9 conversion (more bellhousing less plate)

Image
Opened out

Image
Adapter plate

Image
Ready to be welded

Image
Welded

Image
Close up of the cast welding (If anybody wants these made up, I can get it all done for you PM me)

Image
Bolted on the box

Image
Screens, Interior, and headling out (engine and box are out too at this point)

Image
Previous repairs to headlining

Image
State of doorcards

Image
Image

Image
Faithful helper, for once not getting under my feet, but I can't work with out him around

Image
Current state in the garage, being cleaned and prepped for welding

Image
Image
Last edited by Icedmunkie on Sun Dec 03, 2017 10:42 am, edited 1 time in total.
All Smoke...... No Poke
Icedmunkie
Brabham Viva
Brabham Viva
 
Posts: 596
Joined: Wed Mar 31, 2010 7:57 pm
Location: Broad Marston, Worcestershire

Re: 1972 Vauxhall Firenza Restoration

Postby bedfordbad » Sun Jan 08, 2012 1:20 am

Good stuff, nice car and tax exempt too!! Forgive my ignorance but which gearbox have you converted to fit?, Is it a 5 speed?
Regards steve
BEDFORD HAE AAB412H
BEDFORD HA ROMA UJJ742F
BEDFORD HA 130 TNN514R
VARIOUS HA VANS AND ROMA`S FOR SPARES.
User avatar
bedfordbad
GT Viva
GT Viva
 
Posts: 406
Joined: Sat Jul 16, 2011 9:05 pm
Location: CONSETT DURHAM

Re: 1972 Vauxhall Firenza Restoration

Postby Icedmunkie » Sun Jan 08, 2012 7:59 pm

Yes, its the 5 speed Type 9 Ford gearbox, as fitted to Capri and sierras. Idea stolen and plenty of help from House on here with advice and even parts.
All Smoke...... No Poke
Icedmunkie
Brabham Viva
Brabham Viva
 
Posts: 596
Joined: Wed Mar 31, 2010 7:57 pm
Location: Broad Marston, Worcestershire

Re: 1972 Vauxhall Firenza Restoration

Postby jpsmit » Mon Jan 09, 2012 4:34 pm

Icedmunkie wrote:Yes, its the 5 speed Type 9 Ford gearbox, as fitted to Capri and sierras. Idea stolen and plenty of help from House on here with advice and even parts.


How much alteration will you have to do to the sheet metal of the car itself? and, is this the same conversion as would be required for a Viva GT?
User avatar
jpsmit
Baby Bertha
Baby Bertha
 
Posts: 1130
Joined: Fri Jun 03, 2011 4:00 am
Location: Toronto

Re: 1972 Vauxhall Firenza Restoration

Postby Icedmunkie » Tue Jan 10, 2012 11:30 pm

None that I have found so far, Will have to adjust the gearbox mount but that shouldnt be hard... I guess it would be the same mods but cannot say for sure.
All Smoke...... No Poke
Icedmunkie
Brabham Viva
Brabham Viva
 
Posts: 596
Joined: Wed Mar 31, 2010 7:57 pm
Location: Broad Marston, Worcestershire

Re: 1972 Vauxhall Firenza Restoration

Postby hbpeter » Wed Jan 11, 2012 8:45 pm

Icedmunkie, isnt yours a 1256? If so the converstion will be different for an OHC GT. Or have got the wrong end of the stick?

Peter
Reading between the lines, dangerous if your waiting for a train.
User avatar
hbpeter
Register Rep
 
Posts: 10915
Joined: Sat Oct 29, 2005 12:11 pm
Location: Thornaby, Cleveland

Re: 1972 Vauxhall Firenza Restoration

Postby Icedmunkie » Thu Jan 12, 2012 1:17 pm

No yours information is right... I have completely written the wrong information by not reading things correctly.
No clue what you would need to do it too an OHC engine, might be able to use the Type 9 bellhousing...
All Smoke...... No Poke
Icedmunkie
Brabham Viva
Brabham Viva
 
Posts: 596
Joined: Wed Mar 31, 2010 7:57 pm
Location: Broad Marston, Worcestershire

Re: 1972 Vauxhall Firenza Restoration

Postby MattyE » Fri Jan 13, 2012 11:33 am

was discussing with a few peeps on facebook the other day, for an OHC a good 5speed conversion is the Toyota W58 box - used in a lot of cars including the lotus Excel with the vauxhall derived lotus 907 engine, will bolt up to a vauxhall OHC with the lotus bellhousing - has hydraulic clutch so will have to transplant cylinders too
(read in the DSN that an attempt to convert to cable operated did not go well)

from Wikipedia : -

First Gear: 3.285:1
Second Gear: 1.894:1
Third Gear: 1.275:1
Fourth Gear: 1.00:1
Fifth Gear: 0.783:1

1982-1986 Toyota MK 2 Celica Supra
1986-1992 Toyota MK 3 non-turbo Supra
1993-1998 Toyota MK 4 non-turbo Supra
1986 Toyota Cressida
1986 Toyota Soarer
1982-1992 Lotus Excel
1992-1997 Lexus SC300
1998-2005 Lexus IS300 5 speed
1978 Magnum 2300 4dr
1972 Firenza 2300 Sport SL
1999 Saab 93 SE
User avatar
MattyE
GT Viva
GT Viva
 
Posts: 162
Joined: Wed Jul 01, 2009 6:36 pm

Re: 1972 Vauxhall Firenza Restoration

Postby Icedmunkie » Thu Feb 09, 2012 6:35 pm

Been a bit busier cutting holes in the car and finding more rusty areas
Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
All Smoke...... No Poke
Icedmunkie
Brabham Viva
Brabham Viva
 
Posts: 596
Joined: Wed Mar 31, 2010 7:57 pm
Location: Broad Marston, Worcestershire

Re: 1972 Vauxhall Firenza Restoration

Postby pbottomley » Thu Feb 09, 2012 7:10 pm

Great to see progress, its always good to see things improve :D
User avatar
pbottomley
 

Next

Return to Restoration

Who is online

Users browsing this forum: No registered users and 4 guests

cron