Page 1 of 1
Viva GT - Front Bearing Parts numbers needed
Posted:
Sat Feb 04, 2012 4:46 am
by jpsmit
never did get an answer - I presume the front bearings are the same for the HB and the GT? (is this true?)
Mine are somewhat worn but the big ones seem to say KLM 11710 does this make sense?
anyone know what the smaller one is?
thanks all
Re: Viva GT - Front Bearing Parts numbers needed
Posted:
Sat Feb 04, 2012 12:05 pm
by pbottomley
HA HB and HC front wheel bearings should all be the same
Re: Viva GT - Front Bearing Parts numbers needed
Posted:
Fri Feb 10, 2012 5:43 am
by jpsmit
pbottomley wrote:HA HB and HC front wheel bearings should all be the same
which, if I understand correctly is the same as a North American Chevette
Re: Viva GT - Front Bearing Parts numbers needed
Posted:
Fri Feb 10, 2012 11:13 am
by StefanM
very common bearings and bearings alone as set is old SKF VKB300 which any partfactor can crossref.
But here they are: LM11749/LM11710 and L44649/L44610
Re: Viva GT - Front Bearing Parts numbers needed
Posted:
Sun Feb 12, 2012 3:39 am
by jpsmit
StefanM wrote:very common bearings and bearings alone as set is old SKF VKB300 which any partfactor can crossref.
But here they are: LM11749/LM11710 and L44649/L44610
Thanks Stefan - you wouldn't by chance have a number for the seal would you?
thanks
Re: Viva GT - Front Bearing Parts numbers needed
Posted:
Mon Feb 13, 2012 1:51 pm
by StefanM
SKF part numbers: Bearings VKB300, Seal: VKA026, Later bearing kit with seal: VKBA512
Vauxhall 6389292, Payen NA521
Re: Viva GT - Front Bearing Parts numbers needed
Posted:
Thu Feb 16, 2012 5:23 am
by jpsmit
Fantastic! thank you!
Re: Viva GT - Front Bearing Parts numbers needed
Posted:
Thu Feb 16, 2012 5:38 am
by jpsmit
StefanM wrote:SKF part numbers: Bearings VKB300, Seal: VKA026, Later bearing kit with seal: VKBA512
Vauxhall 6389292, Payen NA521
OK, me again, went to the store and came home with Timken seals #3357. Does anyone know if this is interchangeable with the seal mentioned above?
Re: Viva GT - Front Bearing Parts numbers needed
Posted:
Thu Feb 16, 2012 8:07 am
by StefanM
do not have any crossref`s for timken products but measurements are roughly 2"x 1,5"