Page 1 of 5

Viva 2300SL "Barney"

PostPosted: Wed Aug 15, 2012 7:53 am
by bluemoontezza
The restoration on "barney" has started.
The viva was on ebay and had been in a barn since 1991.
Barney had a very bad skin complaint,paint on roof and boot had rusted due to being covered for so long.
Barney could not torque/talk lol due to engine seized--tried freeing with diesel but looks like gugion to piston problem.
Over last months have sorced parts from all over england.
I started the resto and stripped it for paint etc
The car is in paint shop as we speak
Picture 191.jpg
Inner fitch started
Picture 191.jpg (292.57 KiB) Viewed 2260 times

a lot more photos to follow when i work out how to resize them
Terry
SL-1-resize.jpg
The Secondhand new wing fitted
SL-1-resize.jpg (109.75 KiB) Viewed 2257 times

Re: Viva 2300SL "Barney"

PostPosted: Wed Aug 15, 2012 2:34 pm
by Paul Dawson
Lots of photos of welding please :wink:

Re: Viva 2300SL "Barney"

PostPosted: Wed Aug 15, 2012 2:45 pm
by hbpeter
Well done, another one saved. Pictures please.

Peter

Re: Viva 2300SL "Barney"

PostPosted: Wed Aug 15, 2012 7:18 pm
by Retro morgs
Nice one! Keep it coming :D

Re: Viva 2300SL "Barney"

PostPosted: Mon Aug 20, 2012 11:10 am
by bluemoontezza
Work is continuing on car,went to norfolk where car is being refurbed.
Looks like its going well :D :D

Inner flitches had been done in the 80s badley,just tacted over rust,N/S had been done twice,but now have been totally cut out.Have gone for the satin black look in the engine bay.

Post more pictures soon

Terry :thanx:

Re: Viva 2300SL "Barney"

PostPosted: Mon Aug 20, 2012 9:50 pm
by bobblehead006
Tidy.. :respekt:

Re: Viva 2300SL "Barney"

PostPosted: Tue Aug 21, 2012 11:38 am
by bluemoontezza
More bodywork pictures
rear arches were rusted and also rear sill area and floor at rear seat belt areas.
the short sills are very good,did get original ones but are not needed,
Terry

Re: Viva 2300SL "Barney"

PostPosted: Tue Aug 21, 2012 11:50 am
by bluemoontezza
This is how n/s rear has turned out to now,rear quarter has been bare metalled,arch cut in,sill and floor repaired
Terry

Re: Viva 2300SL "Barney"

PostPosted: Fri Aug 31, 2012 7:52 pm
by bluemoontezza
Went back to Shipdham today to look at the progress of my car,
I used the same guy "Mydadhadoneofthose" used for his ruby viva.
This is first time seen car in colour after most of it had been bear metaled
Heres the progress :) :D
Terry

Re: Viva 2300SL "Barney"

PostPosted: Fri Aug 31, 2012 9:49 pm
by bluemoontezza
More pictures,cant wait to put it together :)
Fronts very high but sure that 2279cc lump will sort that :wink: :wink:
And think new arches on rear wings look good :D
And no thats not my Daf :lol: :lol:
Terry