Page 7 of 7

Re: magnum 2.3

PostPosted: Wed Jun 26, 2013 3:41 pm
by Magnum2300chris

Re: magnum 2.3

PostPosted: Wed Jun 26, 2013 3:43 pm
by Magnum2300chris

Just a fue piks from today paint under arches

Re: magnum 2.3

PostPosted: Wed Jul 03, 2013 9:01 am
by martin-reyland
droopsnoot wrote:
Magnum2300chris wrote:Have i got the oil cooler the right way up ................
Is it suposter be pipes at top or have it upside down pipes at bottam




Does the next picture show that you've blocked off all the airflow to the oil cooler by sticking a number plate in front of it? If you have, that probably negates any effect it will have.


The only way to know for sure is to monitor oil temps, you'd be surprised how much air will still get through the cooler in that position. I learned not to take anything regarding airflow through rads for granted years ago after a mate of mine was involved in some testing at Mira, basically a large manufacturer was thinking about using a new front bumper design and was concerned that the new narrow opening design in conjunction with a std UK reg plate would restrict flow and would cause the intercooler to be less efficient and cause high intake temps. Testing was done and they found the intercooler was more efficient with a number plate in place than it was when it was completely removed!!! :shock:

Re: magnum 2.3

PostPosted: Sat Jul 13, 2013 10:48 am
by Magnum2300chris


Old pick when i first got the car

Re: magnum 2.3

PostPosted: Wed Jul 17, 2013 1:49 pm
by Magnum2300chris

Just renewing ball joint...wheel bering....shocks...brakes
The bolt is stuck on damper not happy

Re: magnum 2.3

PostPosted: Fri Jul 19, 2013 2:14 pm
by Magnum2300chris

Re: magnum 2.3

PostPosted: Sat Jul 20, 2013 5:13 pm
by Magnum2300chris

All nice and new

Re: magnum 2.3

PostPosted: Tue Jun 03, 2014 1:30 pm
by Magnum2300chris


just a fue piks from today let u no iv still got her

Re: magnum 2.3

PostPosted: Tue Jun 03, 2014 1:48 pm
by Magnum2300chris