Page 1 of 1

rubbers for bonnet area.

PostPosted: Mon Jul 09, 2018 10:12 am
by WAYNECOLVILLE
Rubbers for bonnet holder and side bonnet aligners etc. Who supplies these. cheers

Re: rubbers for bonnet area.

PostPosted: Mon Jul 09, 2018 5:20 pm
by 1972nail
I believe that they are being re-manufactured at the minute, or at least being looked at for re-manufacture.

Re: rubbers for bonnet area.

PostPosted: Mon Jul 09, 2018 6:47 pm
by droopsnoot
I've been looking at doing the side ones, though haven't done much more. Is there someone else on the case David?

Re: rubbers for bonnet area.

PostPosted: Mon Jul 09, 2018 7:05 pm
by 1972nail
It was you I was thinking of...... :lol:

Re: rubbers for bonnet area.

PostPosted: Tue Jul 10, 2018 10:18 am
by droopsnoot
Ah, OK. I've been messing with the heater control knobs mostly, but did start digging around in the boxes for a decent bonnet rubber to take a mould from.

On the plus side, this warm weather means that any experiment goes off really quickly, so I can do several "runs" in a normal afternoon without leaving things overnight to set.

Re: rubbers for bonnet area.

PostPosted: Tue Jul 10, 2018 12:02 pm
by Mike Attew
Hi Droopsnoot,
Is this what you are looking for?, not pristin but usable possibly to make a mould from? If so you are welcome to borrow it.

Re: rubbers for bonnet area.

PostPosted: Tue Jul 10, 2018 6:48 pm
by droopsnoot
Thanks, I've got one as good as that but have some other options to go with.

Re: rubbers for bonnet area.

PostPosted: Wed Jul 11, 2018 7:16 am
by lord13
ahh I've just given a bag of these away , i had about 6 ...i may have some more somewhere, i'll have a look . . .