HB Door glass fitting

This is an area for discussion about Restoration issues.

HB Door glass fitting

Postby BobbyMel » Fri Nov 13, 2020 10:53 pm

What's the best sequence for fitting quarterlights and drop glass into doors. Is it best to put drop glass into bottom of door, then fit quarterlight upright frame, with the quarter glass, then jockey it all together....or is there a proper way?
HB 368

1970 - Vauxhall HB Viva Estate....114 BOB
1968 - Vauxhall HB Viva Estate....TMH 833F
1968 - Vauxhall HB Viva Estate....NHA 764F
2015 - Vauxhall Astra 1.4 Excite...NL65 MDO
1987 - Austin Montego 1.6L....E375 JRV
1995 - Rover 216 Coupe....N622 VOA
User avatar
BobbyMel
Top Viva Spotter
 
Posts: 833
Joined: Thu Sep 16, 2010 7:43 pm
Location: Washington

Re: HB Door glass fitting

Postby rizzo » Sat Nov 14, 2020 5:28 pm

The way i did it Bob was to drop the glass in the door, then slide the 1/4 light in secure it but not the bottom mount yet, fit the door runner seals then fit glass to runners, you might have to work one of the seals up and down to get the glass in, fit lower 1/4 light screw, once in fit outer then inner glass seals.
For me that was a one man paint saving way, i would imagine you could also fit all the seals first, hold the glass in one runner then slide down the 1/4 light to mount it.
Prior to putting windows in i fitted the door stainless trim first, these are easy to do with the right clips in the correct position.
HB 1159 1968 10K White
HB 4000 1968 Green
User avatar
rizzo
Brabham Viva
Brabham Viva
 
Posts: 892
Joined: Sun Nov 09, 2008 10:43 pm
Location: North Yorks


Return to Restoration

Who is online

Users browsing this forum: No registered users and 1 guest