Page 1 of 1

HC Exhaust System 1256

PostPosted: Fri Mar 24, 2023 7:07 pm
by John Boyne
Hi Folks

Would anyone out there have photos of the above exhaust system?
I have a new system, but need images to show where the rubbers and brackets should be located to support the exhaust

Many thanks
John

Re: HC Exhaust System 1256

PostPosted: Mon Mar 27, 2023 11:57 am
by HC Fairley
Hi John,

Does this help?

I believe there are 3 rubbers and one bracket used on the exhaust system. There should be a plate and hook located at the very rear of the car beside the fuel tank, use this and a clamp with a rubber to support the tailpipe of the exhaust.

The second silencer located near the back of the car is supported by a bracket that hangs by ( I think) 2 rubbers, a bit like the one in this eBay link. I'm not sure if this is the exact hanger but you get the idea, it wraps around the silencer.

Unfortunately I can't provide any on car photos as my own exhaust system is a custom made 2" with only one silencer.

Hopefully some of the information here is of use to you.

https://www.ebay.co.uk/itm/363984770356 ... gLI2vD_BwE

Re: HC Exhaust System 1256

PostPosted: Wed Mar 29, 2023 8:01 pm
by John Boyne
Hi

This is superb and will definitely help
Many thanks for the information

John