Page 1 of 1

Magnum Valance

PostPosted: Tue Apr 07, 2009 2:30 pm
by petrolhead63
My magnum has its centre section to the front valance missing, the bulge? I am not sure if it has been cut out or if it is a spearate part. The car is not rusty and the remainder of the valance is in good solid condition.

There is a piece of mesh under the radiator on the valance but to metalwork below that where I think it has a bulge/scoop affair.

Whats missing please, I need to find one!

front valance

PostPosted: Tue Apr 07, 2009 10:06 pm
by vxmad
Hi I do have one that is still on my 4 door magnum, But I live in Somerset Plus I have not looked at it to see if it ok but I can if you want me to. Steve

PostPosted: Wed Apr 08, 2009 10:18 am
by droopsnoot
It's a separate part, bolts into the valance with a captive bolt on either side. Maybe the mesh has been fitted to allow a bit more air into the engine bay.

valance

PostPosted: Sun Apr 12, 2009 11:05 pm
by vxmad
My section that bolts to the valance seems to be ok, so if you want it i can take it off for you plus get a quote for posting. regards Steve

PostPosted: Mon Apr 13, 2009 9:39 pm
by petrolhead63
hi, I did try a personal message the other day to you, guess it did not work! I would like a centre valance section and your help would be appreciated.

If post is a real pain for you after weighing it up let me know, I have previously used a courier collect by sending a pre filled docket, pre paid by me..you only need to be in on the alloted day!

the pm had my e-mail if you want to send a picture of what it looks like!

cheers Russ