Page 1 of 1

Early HC wiring looms

PostPosted: Wed Jan 01, 2014 6:53 pm
by 1972nail
I have a selection of early HC looms for sale.

A- Perfect early single column switch HC interior loom, no burning to the headlight switch wires, not even a bit of sheathing out of place. Even the boot section is unmarked. Perfect tail light connections as well. Came from an early 1256 SL which was about 2-3 years old when scrapped.

B- Good 2300 SL twin headlight engine bay lighting loom only requiring one headlight connector replacing. Will repair for you if required.

C - A couple of reasonable OHV engine looms from early 1265 and 1159 cars - various alternator connections - saveablr or good for parts to repair another loom.

D- Some rectangular headlight lighting looms needing some work - saveable or good for parts.

None of these have the Brake Failure Warning light connection.

PM me soon as heading for eBay next week.

Re: Early HC wiring looms

PostPosted: Sat Jan 04, 2014 2:02 am
by 1972nail
Anyone interested?

Free listing at the minute so heading for eBay tomorrow.

Re: Early HC wiring looms

PostPosted: Sat Jan 04, 2014 8:06 am
by Paul Dawson
Any idea of prices?

Re: Early HC wiring looms

PostPosted: Sat Jan 04, 2014 12:21 pm
by Icedmunkie
Dependant of price
Loom A please

Re: Early HC wiring looms

PostPosted: Sat Jan 04, 2014 12:24 pm
by 1972nail
Photos of 1256 loom.

Image
Complete loom

Image
Tail light and fuel tank connection. I should be able to supply a connector to convert 2 connector taillights to suit if necessary.

Image
Headlight connections - no overheating damage.

Image
Indicator connect not cut into for hazard lights.

Image
Part number tag.

Re: Early HC wiring looms

PostPosted: Sat Jan 04, 2014 12:27 pm
by 1972nail
I'm repairing the twin headlamp loom before offering it on eBay. It will fit all Firenzas with twin headlamps, not just OHC cars. £15 plus carriage starting bid.

The other OHV engine and lighting looms for spares / repair £10 as a job lot.

The main 1256 loom now 'spoken for' awaiting payment.

Re: Early HC wiring looms

PostPosted: Sun Jan 05, 2014 2:23 pm
by ShaBro
bugger, I wish I had noticed the twin headlight loom on here before bidding on it on ebay :oops:

Re: Early HC wiring looms

PostPosted: Sun Jan 05, 2014 4:38 pm
by 1972nail
The 1256 loom and an excllent rectangular headlight loom are both going to a good home along with the best of my engine looms.

The twin headlight loom is on ebay along with a hazard switch I removed from a Magnum years ago (seperate listings). I still have a couple of rough engine bay lighting and engine looms for a 70 - 73 HC OHV - not on eBay - offers welcome.

I also have the whole resistance wire circuit complete and perfect if anyone is interested. I removed it from a damaged 2300 loom which I stripped for my recent wiring project, it had the 7 dial dash and warning light connections hacked off.

I also have loads of spare HC connectors. PM if interested.

Re: Early HC wiring looms

PostPosted: Sun Jan 05, 2014 5:34 pm
by 1972nail
While I'm advertising my bits for sale on eBay I have a Girling 19mm rear wheel cylinder for HB's and early HC's. I think take 19mm (3/4 inch) one was for OHC cars but not certain.

Item number 111250064748

Re: Early HC wiring looms

PostPosted: Tue Jan 07, 2014 9:13 pm
by 1972nail
Engine looms are now gone. Twin headlight loom still on eBay.

I've found another almost perfect headlight loom for a very early HC - probably 70 or 71 1159 /1600cc and possibly 2000 Firenza.

BUT.... this early loom was not headlight specific as it did not have headlight connectors fitted but instead it is fitted with a 3 pin connector which could be fitted to either a single headlight or twin headlight 'sub loom' just behind each headlight. Will post photos if there is an interest.

£10 plus postage and I may be able to supply the connectors to allow you to make up the sub looms.

I also found 2300 Sport SL 7 dial (ammeter) interior loom complete with the extension loom to the centre console. It has been cut where the rear light 'tail' passes along the sill. Not for sale at the moment but may be soon.......

Definitely no more looms left now....I've no more places to look :-)