Page 1 of 2

Inner wing repair panel and nos ignition advance unit

PostPosted: Tue Apr 16, 2019 8:07 am
by mactat2
Hi guys, got these on ebay if anyones after them...

new old stock ignition advance unit still in box, i believe it fits 2300 or 1800

https://www.ebay.co.uk/itm/293048710121


and a new old stock inner wing repair panel (hinge area)

https://www.ebay.co.uk/itm/293039521583

:thanx:

Re: Inner wing repair panel and nos ignition advance unit

PostPosted: Mon May 13, 2019 8:54 pm
by reb78
I may be being a bit dim, but which side is the inner wing repair panel for? I could do with a driver side panel.

Re: Inner wing repair panel and nos ignition advance unit

PostPosted: Tue May 14, 2019 7:35 am
by Kraken
Looks like O/S (passenger) to me

Re: Inner wing repair panel and nos ignition advance unit

PostPosted: Tue May 14, 2019 9:57 pm
by Fred Dukes
Club has stock of HB inner wing repair panels

Re: Inner wing repair panel and nos ignition advance unit

PostPosted: Tue May 14, 2019 10:00 pm
by reb78
Fred Dukes wrote:Club has stock of HB inner wing repair panels


Thanks Fred - this is needed for an HC (Magnum) - i don't suppose you know of anywhere that might have these?

Re: Inner wing repair panel and nos ignition advance unit

PostPosted: Wed May 15, 2019 7:20 am
by lord13
I have two HC inner wings, they have been chopped about a bit ( battery tray has been cut out, but its still there, just needs welding in) and the edges are a bit frilly ( only the very return edge at each end). I can't for the life of me remember what the upper return edge is like but as far as I can remember they are good. I also think both hinge panel areas are good, I can send you pictures if you like.
I bought these to repair and to make pattern repair panels from, but have given up on that, so make me an offer :)
I can weld the batt tray back in for you if you like but the price will have to be including my labour and materials then. up to you :)

Re: Inner wing repair panel and nos ignition advance unit

PostPosted: Wed May 15, 2019 10:15 am
by reb78
lord13 wrote:I have two HC inner wings, they have been chopped about a bit ( battery tray has been cut out, but its still there, just needs welding in) and the edges are a bit frilly ( only the very return edge at each end). I can't for the life of me remember what the upper return edge is like but as far as I can remember they are good. I also think both hinge panel areas are good, I can send you pictures if you like.
I bought these to repair and to make pattern repair panels from, but have given up on that, so make me an offer :)
I can weld the batt tray back in for you if you like but the price will have to be including my labour and materials then. up to you :)


Some pics of the bits would be great please. No need to do any welding as I can tackle that - plus the rot doesn't extend along the current battery tray area, its mostly in the vertical part, so i may get away without removing that from the current wing. I can tidy the return edge up so corrosion there shouldn't be a problem (the passenger side has a little along that area.

Re: Inner wing repair panel and nos ignition advance unit

PostPosted: Thu May 16, 2019 7:17 am
by lord13
I'll take some pics today after work and send them to you :D

Re: Inner wing repair panel and nos ignition advance unit

PostPosted: Thu May 16, 2019 10:06 am
by reb78
lord13 wrote:I'll take some pics today after work and send them to you :D


Brilliant. Thanks!

Re: Inner wing repair panel and nos ignition advance unit

PostPosted: Thu May 16, 2019 6:17 pm
by lord13
Sent you a pm with lots of pics
cheers