Page 1 of 2

Stainless exhausts & Manifolds

PostPosted: Tue Mar 30, 2010 2:13 pm
by phil dawson
I remember reading on here about a supplier who was manufacturing stainless exhaust systems and manifolds for the slant 4 engine but can't find the article about it now.
Can anyone point me in the right direction?

Cheers,
Phil

Re: Stainless exhausts & Manifolds

PostPosted: Wed Mar 31, 2010 8:43 am
by shamm
Hi,

Would that be us?

We are having a custom tubular manifold and system designed for the slant engines which will be available in steel and stainless.
The manifold is based on the janspeed layout and the system is 2" throughout and optimized for gas flow and minimum noise.

This not in production yet, probably another month before we have the prototypes back.
Will announce on here and the web site when it's all ready.

Steve.

Gryphon Design and Manufacturing
http://www.gryphondesign.co.uk

Re: Stainless exhausts & Manifolds

PostPosted: Wed Mar 31, 2010 9:33 am
by phil dawson
Hi Steve,

Thanks for your response.
Not sure if it was your company or not but there was prices etc quoted so I was assuming that these were in manufacture already.
Can you still see the article that was on the forum?

Cheers,
Phil

Re: Stainless exhausts & Manifolds

PostPosted: Thu Apr 01, 2010 8:49 am
by shamm
Not sure who the other supplier would be then, how many moons ago was this ?

Steve.

Re: Stainless exhausts & Manifolds

PostPosted: Thu Apr 01, 2010 10:27 pm
by phil dawson
Steve,

I'd say aout a year ago.

Phil

Re: Stainless exhausts & Manifolds

PostPosted: Fri Apr 02, 2010 10:32 pm
by phil dawson
Steve,
I will be looking for a manifold and exhaust system for my 2 litre slant 4.
Would appreciate any info you have on them and when they are going to be available.

Cheers,
Phil

Re: Stainless exhausts & Manifolds

PostPosted: Sun Apr 04, 2010 9:55 pm
by shamm
Hi Phil,

Is this a HB or HC?

Steel or Stainless Manifolds and systems for HC slant engines should be avaliable within 4-6 weeks.
Manifold is based on the JanSpeed design but the primaries are slightly bigger as the JanSpeed was designed for an 1800 and the 2000 and 2300 need a bit extra flow.
System is a two box 2" system.

Steve.

Re: Stainless exhausts & Manifolds

PostPosted: Sun Apr 04, 2010 11:13 pm
by phil dawson
Steve,

It is an HC - Firenza 2000.
That's great if they are going to be ready soon, I will definately be interested.
Have prices been finalised?

Regards,
Phil

Re: Stainless exhausts & Manifolds

PostPosted: Mon Apr 05, 2010 1:16 pm
by shamm
Won't know the prices until the prototypes are finished, 2-3 weeks

Steve.

Re: Stainless exhausts & Manifolds

PostPosted: Mon Apr 05, 2010 2:06 pm
by pbottomley
is this the OHV ones as well?