decided to weld in repair panels rather than change the whole inner wing, going for as low a budget as possible, butt welded these in from underneath so that cleaning up the welds in the engine bay would be easier
The front panel really is past it, so i will be replacing it with a second hand one that iv'e got along with second hand wings, so that overcomes that hurdle, Rizzo, I was thinking the same only I'm not brave enough to strip the whole front down to the chassis rails
Not a lot done on this lately, been doing work on the house, finished the welding on the front offside, even with repair panels there was still some fabricating to do on the wing rail & headlight mounting. Will put up some pics later