by 1972nail » Wed Jul 18, 2018 4:06 pm
Midget Rostyles are 101.6 PCD (4") so in theory they should fit. However, they were designed for a 3/8" stud and not a 7/16" stud, so you may have to drill out the holes to fit. Also, some have a different pressing which makes them a tight fit on the front hub bearing housing, bolting up tight on this can cause the steel to split....not good! You can fit a 6mm spacer if your Midget Rostyles are a tight fit on the housing so that they don't bind and spread.
I believe that Midget wheels are 41/2 J and not 5J.
Editor of the VVOC Magazine ReVival
"When you have a Firenza like mine, who needs any Minis?" copyright David Maxwell 1979.