HA cylinder heads

Here are lookups tables for chassis codes, trim and paint codes and Option codes. taken directly from original Vauxhall Part manuals and books.

HA cylinder heads

Postby daveh » Sun Dec 09, 2018 1:44 pm

Hi there
I have an SL (not a 90) with servo discs, I also have a set of twin carbs on an inlet manifold which fit the car - one of the upgrade merchants when these were new :) .
I am considering putting a high compression, or at least a large valve head on, shouldnt be an obtrusive mod. Does anyone either have one, know of one or can advise on whether the vans all have at least larger exhaust valves (I have heard this but no real proof)
daveh
De Luxe Viva
De Luxe Viva
 
Posts: 13
Joined: Tue Apr 23, 2013 9:32 am

Re: HA cylinder heads

Postby jpsmit » Mon Dec 10, 2018 3:25 am

Can't help with the head but, you would be better to ask the question either in the General Forum or the Wanted (if you are a member) no one will look here.

good luck!
User avatar
jpsmit
Brabham Viva
Brabham Viva
 
Posts: 961
Joined: Fri Jun 03, 2011 4:00 am
Location: Toronto

Re: HA cylinder heads

Postby pbottomley » Mon Dec 10, 2018 6:26 pm

Only diff is squish, easy to make skim it down ti suit

Compression ratios for 1057cc engines:

Standard engine 8.5:1 (HA20)
low compression engine 7.3:1 (HA20) Vans and optional on saloons
90 engine 9.0:1 (HA21)

HA20 3.175 inches (to 20HA / 253413)
HA20 3.168 inches (from 20HA / 253414)
HA21 3.140


Compression ratios for 1159cc engines:

HB22 8.5:1 & 7.3:1 (7.3:1 low compression optional)
HB23 9.0:1 (90 engine)

HB22 3.185 inches 80.89mm
HB23 3.157 inches 80.19mm
User avatar
pbottomley
Engine Shed
 
Posts: 9358
Joined: Wed Oct 26, 2005 8:44 am
Location: Shed of Plenty


Return to HA Technical details

Who is online

Users browsing this forum: No registered users and 0 guests

cron