Viva GT centre console

General Discussions about The Vauxhall Viva Owners Club, do you require something from the club we dont offer? What the club is doing for you. NOT for slagging people off, all such comments will be deleted.
Forum rules
Please pay attention to the ‘protocol’ in this forum. This is a friendly club, and we really don’t wish to get into any personal or abusive dialogs. Any such e-mails may be removed, and the person responsible may have their Forum membership revoked

Viva GT centre console

Postby Orrp01 » Thu Oct 24, 2019 11:01 pm

Was just wondering If anyone has a mk2 console top section for sale. I never had the upper section and would be interested in one no matter what the condition as I could use it for a template to possibly make one up ty
Philip Orr
Viva GT
User avatar
Orrp01
SL Viva
SL Viva
 
Posts: 33
Joined: Mon Jun 18, 2018 3:05 pm
Location: N.ireland

Re: Viva GT centre console

Postby Colin » Thu Nov 07, 2019 6:32 pm

The console body itself is the same for both Mk I & II. The only difference being the vertical steel plate above the speaker housing - for two instruments in Mk I or just clock in Mk II.

I think the only option might be to take a mould from a console and replicate it in glass fibre.

3D printing is the future for the radio / speaker and handbrake panel inserts - and other rare trim pieces.
Last edited by Colin on Sun Nov 10, 2019 8:27 am, edited 1 time in total.
User avatar
Colin
Brabham Viva
Brabham Viva
 
Posts: 845
Joined: Mon Oct 29, 2007 11:53 pm
Location: A secret location somewhere in England

Re: Viva GT centre console

Postby jamezz666 » Thu Nov 07, 2019 6:57 pm

I believe you're after what i am after and thats the single clock speaker grille part. I've been trying to find someone, who can lend the part to be 3D printed, but i'm struggling to find someone.
I think the main concern, would be the part getting damaged in the post
User avatar
jamezz666
GT Viva
GT Viva
 
Posts: 292
Joined: Tue Jul 28, 2015 3:24 am
Location: worcestershire

Re: Viva GT centre console

Postby Colin » Thu Nov 07, 2019 8:42 pm

I have one James, and I would be happy to lend it to you for 3D printing - if you can do that - but, as you say, I'm concerned about damage. I would need to bring it to you. Same applies with my Mk II console.

I need these parts for my own Mk II GT restoration. But I am willing to help with 3D printing or to provide a cast.

I'm only an hour or so away in Shropshire.
User avatar
Colin
Brabham Viva
Brabham Viva
 
Posts: 845
Joined: Mon Oct 29, 2007 11:53 pm
Location: A secret location somewhere in England

Re: Viva GT centre console

Postby jamezz666 » Fri Nov 08, 2019 12:09 pm

Colin wrote:I have one James, and I would be happy to lend it to you for 3D printing - if you can do that - but, as you say, I'm concerned about damage. I would need to bring it to you. Same applies with my Mk II console.

I need these parts for my own Mk II GT restoration. But I am willing to help with 3D printing or to provide a cast.

I'm only an hour or so away in Shropshire.


Colin i'll PM you
User avatar
jamezz666
GT Viva
GT Viva
 
Posts: 292
Joined: Tue Jul 28, 2015 3:24 am
Location: worcestershire

Re: Viva GT centre console

Postby Orrp01 » Wed Nov 13, 2019 12:02 am

The console I have is out of a mk 1 with the two clocks but the grille area on it is quite badly damaged so would be interested if you can get that area 3D printed and change it to the same as a mark 2. The main bit I need is the top part that has the ignition switch and the other switches in it and covers the area around the handbrake and gear lever
Philip Orr
Viva GT
User avatar
Orrp01
SL Viva
SL Viva
 
Posts: 33
Joined: Mon Jun 18, 2018 3:05 pm
Location: N.ireland


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 9 guests