Back and front screen replacement

Do you need help with your bodywork, Help is at hand

Re: Back and front screen replacement

Postby rizzo » Fri Nov 08, 2019 10:50 pm

Hey Fred whats the link for screen rubbers please looking to get some good fitting rubbers :D unless anyone has any recommendations.
HB 1159 1968 10K White
HB 4000 1968 Green
User avatar
rizzo
Brabham Viva
Brabham Viva
 
Posts: 909
Joined: Sun Nov 09, 2008 10:43 pm
Location: North Yorks

Re: Back and front screen replacement

Postby Fred Dukes » Sat Nov 09, 2019 10:47 am

CHAIRMAN, and general dogs body
User avatar
Fred Dukes
Club Chairman
 
Posts: 5468
Joined: Sun Oct 30, 2005 10:13 am
Location: Newport, Shropshire

Re: Back and front screen replacement

Postby Bob perry » Sat Nov 09, 2019 3:20 pm

Don't forget as well, if fitting a plastic chrome type strip in the rubber, you will need a trim fitting tool with a little roller on it!! A few quid on flea bay but well worth the price and saving a lot of trouble!!
Mona Viva
Bob perry
GT Viva
GT Viva
 
Posts: 427
Joined: Tue Apr 02, 2013 10:49 pm
Location: farnborough hampshire

Re: Back and front screen replacement

Postby rizzo » Sat Nov 09, 2019 3:53 pm

Fred Dukes wrote:East Kent Trim https://www.eastkenttrimsupplies.com/

Have these been approved by HB owners Fred, do you know?
HB 1159 1968 10K White
HB 4000 1968 Green
User avatar
rizzo
Brabham Viva
Brabham Viva
 
Posts: 909
Joined: Sun Nov 09, 2008 10:43 pm
Location: North Yorks

Re: Back and front screen replacement

Postby rizzo » Sat Nov 09, 2019 3:54 pm

Bob perry wrote:Don't forget as well, if fitting a plastic chrome type strip in the rubber, you will need a trim fitting tool with a little roller on it!! A few quid on flea bay but well worth the price and saving a lot of trouble!!


I do have an insert tool but not with the roller, mines ok for rubber insert but if these are harder plastic then yeh i guess you would need the roller. :goodideasign:
HB 1159 1968 10K White
HB 4000 1968 Green
User avatar
rizzo
Brabham Viva
Brabham Viva
 
Posts: 909
Joined: Sun Nov 09, 2008 10:43 pm
Location: North Yorks

Re: Back and front screen replacement

Postby jpsmit » Sat Nov 09, 2019 9:23 pm

Bob perry wrote:Don't forget as well, if fitting a plastic chrome type strip in the rubber, you will need a trim fitting tool with a little roller on it!! A few quid on flea bay but well worth the price and saving a lot of trouble!!


I think I know what you mean but could you please post a link?

thanks
User avatar
jpsmit
Baby Bertha
Baby Bertha
 
Posts: 1130
Joined: Fri Jun 03, 2011 4:00 am
Location: Toronto

Re: Back and front screen replacement

Postby Fred Dukes » Sat Nov 09, 2019 10:13 pm

I have used the non-roller type with chromed insert successfully :|
CHAIRMAN, and general dogs body
User avatar
Fred Dukes
Club Chairman
 
Posts: 5468
Joined: Sun Oct 30, 2005 10:13 am
Location: Newport, Shropshire

Previous

Return to Bodywork

Who is online

Users browsing this forum: No registered users and 1 guest