General Discussions about The Vauxhall Viva Owners Club, do you require something from the club we dont offer? What the club is doing for you. NOT for slagging people off, all such comments will be deleted.
Forum rules
Please pay attention to the ‘protocol’ in this forum. This is a friendly club, and we really don’t wish to get into any personal or abusive dialogs. Any such e-mails may be removed, and the person responsible may have their Forum membership revoked
by Mike Attew » Fri Mar 26, 2021 8:59 am
I don't need any of these at present.
Are these made by anybody? the bottom channel that the winder attaches to to wind the window.
If not I have been in touch with a bloke who can make them, he now makes them for several different makes and out of stainless. example 2 x MG bottom channels £34
All he needs are a few samples to CNC make the press parts.
Mike
-
Mike Attew
- GT Viva
-
- Posts: 314
- Joined: Tue Mar 13, 2018 11:51 am
- Location: Norfolk
by droopsnoot » Fri Mar 26, 2021 10:06 am
I'd be amazed if anyone makes them specifically for our cars, unless they happen to be the same as (or modifiable from) something else. I'm not actually sure whether I need any for the current project, but then that would be HC so already muddying the waters if (a) they're different and (b) you were talking about HB in your original post. Does the lower volume make a lot of difference to the price, do you think?
-
droopsnoot
- Old Nail
-
- Posts: 2132
- Joined: Mon Oct 31, 2005 2:08 pm
- Location: Cheshire
-
by Fred Dukes » Fri Mar 26, 2021 10:19 am
Hi Mike do you mean the channel that the glass sits in - 21 on the illustration?
- Attachments
-
- HC door mechanisms.pdf
- (872.65 KiB) Downloaded 121 times
Just general dogs body
-
Fred Dukes
- Club Chairman
-
- Posts: 5501
- Joined: Sun Oct 30, 2005 10:13 am
- Location: Newport, Shropshire
by Mike Attew » Fri Mar 26, 2021 11:02 am
Hi Fred,
Yes, that's the part.
I forgot to add , once he has some samples it takes about a week to get into manufacture.
Mike
-
Mike Attew
- GT Viva
-
- Posts: 314
- Joined: Tue Mar 13, 2018 11:51 am
- Location: Norfolk
by Mike Attew » Fri Mar 26, 2021 5:49 pm
I phoned the bloke up today, he explained the basic channels are all the same, the only part he needs to tool up for are the guides on different cars and the position on the channel, he also has 5 classic cars and he is keen to make these parts.
Because it's only the guide he needs to sort it's why he can keep the price down.
He only needs a couple of samples of each type to make new from.
Mike
-
Mike Attew
- GT Viva
-
- Posts: 314
- Joined: Tue Mar 13, 2018 11:51 am
- Location: Norfolk
by Mike Attew » Fri Mar 26, 2021 6:21 pm
He makes them for these cars at present and is adding to the list.
MGB MGC
AUSTIN HEALEY SPRITE
AUSTIN HEALEY
ASTON MARTIN DB4 DB5 DB6
TRIUMPH
MG-MIDGET AUSTIN HEALEY SPRITE
SUNBEAM ALPINE & TIGER
AUSTIN AND MORRIS
LUCAS DASH KNOBS
SMITHS HEATER PARTS
LOTUS
DAIMLER DART
DESMO BADGE BAR
JAGUAR
MGA & MGA TWIN CAM
MORRIS MINOR
MG MAGNETTE MK3 MK4
ROVER & LAND ROVER
RELIANT SCIMITAR GTE & GTC
AC COBRA
FERRARI
SUNBEAM RAPIER
RILEY 1.5 & WOLSELEY 1500
ROOTES HILLMAN & HUMBER
MINI AUSTIN AND MORRIS
ALFA ROMEO
STANDARD 8 and 10
JENSEN HEALEY
MORGAN
Mike
-
Mike Attew
- GT Viva
-
- Posts: 314
- Joined: Tue Mar 13, 2018 11:51 am
- Location: Norfolk
by 1972nail » Fri Mar 26, 2021 8:24 pm
That's an impressive list. It seems that he is making other things than window channels when 'Smiths heater parts' and "Lucas dash knobs' are on the list.
Editor of the VVOC Magazine ReVival
"When you have a Firenza like mine, who needs any Minis?" copyright David Maxwell 1979.
-
1972nail
- Old Nail
-
- Posts: 3203
- Joined: Sun Aug 07, 2011 4:16 pm
- Location: Ballymoney Co Antrim - some say....the World's best place to live!
by Mike Attew » Sat Mar 27, 2021 8:40 am
Mike
-
Mike Attew
- GT Viva
-
- Posts: 314
- Joined: Tue Mar 13, 2018 11:51 am
- Location: Norfolk
Return to General Discussion
Who is online
Users browsing this forum: No registered users and 18 guests