After collecting a pile of axles I'd think it's time to start working! Plan is to convert my HA into front wheel disc brakes, and while I'm at it rebuild and upgrade the entire suspension. Plans include:
- Change steering knuckles to allow calipers to be mounted
- Upgrade to poly bushes
- Fit spax adjustable dampers
- Fit anti roll bar
- Powder coating
Started by disassembling two of the axles. Too bad the ball joint removing tool gave up so one of the steering knuckles are still attached to the A-arms.
One of these subframes will be used. The one closer to the camera looks less rusty but they will need to be inspected closer after some cleaning.
Lots of castor shims indicates something is distorted.
Something is definitly wrong here, more than the camera focus being on the ground!
What I do need before I proceed to have the parts sand blasted is a set of HA van suspension lower arms. From what I've been told some of theese came equipped with front anti roll bar. So if anyone has a set lying around, as well as the arb, I would be very happy to buy them!
If Mod believes this thread belongs in the modifications section, feel free to move it!