Beware using rattly can primer on spots that you rub through!
I had a few small bare spots after rubbing back the primer and rather than mix up some paint and dirty a gun I bought an aerosol can of 2k primer from the same manufacturer as my other prime and used that. The primer had a couple of weeks to 'cure' before the top coat were applied, even so here is the result!!
A couple of places on front wings, the front corner of the bonnet, 4 spots on the roof and 3 areas on the rear wings - all where that primer was used. Thankfully the reaction is almost immediate and areas on the main shell were sorted last week before clear coats were applied. I thought a couple of coats of real primer might block it on the front wings but alsa, no.
Editor of the VVOC Magazine ReVival
"When you have a Firenza like mine, who needs any Minis?" copyright David Maxwell 1979.