vivaha wrote:To change your two pin bi-metal flasher unit to a three pin electronic one is a simple job.
Go down the scrappy and get a flasher unit from a Ford Sierra, Fiesta, Escort or a Vauxhall Cavalier or Mk3 Astra or similar. Find your unit by the column and take of the green wire and put it on terminal 49 of the replacement, take the green/brown wire and put it on terminal 49a. This will leave a terminal marked 31, you need to make a short wire link between this terminal and the body of the car, this should give you a regular one flash a second.
Hope this helps Tim
Hi Tim, bought my appropriate flasher for £4, going to have a go at it as sson as it gets here, thanks for the advice.
