by lord13 » Mon Sep 11, 2017 10:17 am
hi, i've just fitted a pair of fibreglass wings to mine, i used m6 bolts on the lower trailing edge and the lower front edge , where it fits the sill and the front valence respectively. I also used self tapping screws on the top edge where it fits the inner wing, before they were bolted into place i covered all mating surfaces with PU sealer. they are very securely fitted using the PU. very good stuff
However . . .
they were a total pig to get straight and in line with everything, much redressing, trimming and adjustments were needed of both the fibreglass AND the metal surfaces, I did have wings from two different manufacturers though and one did seem to fit much better than the other.