by 1972nail » Thu Jan 18, 2018 5:06 pm
The original metal pulleys are not available anymore. The plastic ones are still available from a supplier in Germany but the quality is dubious.
The bearing in the metal pulley is a standard and easily available bearing I believe and can be bought from a bearing specialist if you know the part number. They have to be pressed in and out.
Magard Sport have the bearings in stock I believe.
Belts are not expensive at less than a tenner from a local motor factors for a Gates one. If they break the engine is a non-interference design so you will be stranded rather than seriously damaged.
Editor of the VVOC Magazine ReVival
"When you have a Firenza like mine, who needs any Minis?" copyright David Maxwell 1979.