Viva front uprights
Posted:
Thu Dec 17, 2020 11:44 amby 2GB Racing
I am restoring a Historic 750 race car which is designed for the geometry of Viva front uprights, I purchased an unbuilt from the 1970s a chassis with front uprights, hubs and discs as removed from a car which I am sure are Viva, The Girling calipers are currently being rebuilt, I have gathered new bearings and grease seals, But I could really do with a contact and or part numbers for discs 210 mm so not Magnum / Firenza and standard road compound pads please.
Re: Viva front uprights
Posted:
Sun Dec 20, 2020 5:14 pmby Fred Dukes
Try EBC there are adverts on Ebay but it says they are for 1.3
https://www.ebay.co.uk/itm/D058-EBC-Sta ... Swc2tZc7rQ
Re: Viva front uprights
Posted:
Sun Dec 20, 2020 7:45 pmby 2GB Racing
Many thanks I will give EBC a call
Re: Viva front uprights
Posted:
Mon Dec 21, 2020 4:30 pmby 2GB Racing
Ok I have called EBC and they only do the larger Magnum, Firenza etc, I require the solid 8 1/4” for Girling calipers with message the e-bay sellar
Re: Viva front uprights
Posted:
Mon Dec 21, 2020 4:58 pmby 1972nail
If you can't get the OHV Viva ones then the larger OHC are exactly the same but a larger diameter. If you have access to a lathe you can turn them down to size.