Re: vented discs conversion
Posted: Wed Dec 09, 2015 12:05 amhave not had chance yet to try this set up behind a 13" superlight,might work with no mods will let youknow 
westcoastdodge wrote:ok guys thanks for the input,the discs i used are renault 21 savanna discs that are 264mm,drilled the holes in the discs and used shorter 12.9 grade (iirc) bolts the 4 pot bolts straight on with a small spacer.no pad overhang,will not fit behind a steel 13" wheel tho without some relieving of the calliper( not ideal)or a wheel spacer(better)
I'm looking at doing the same conversion on my 1256 front. Did you find any issues with the disc hitting the bottom arms. I made a 3mm washer to push it away but keep the bearing sat properly on the stub axle. Also which 4 pots are you using? Thanks Harry