by Firenza » Tue Dec 05, 2006 2:00 pm
You can fit HPF discs to std viva hubs but you need to make an adaptor bell and machine the hub. Once the disc is mounted then you usually need to skim the disc in a brake later to stop any vibration. I have done this for my 2300 rally car and it is OK. Getting hold of HPF discs is not too easy these days, but you should be able to find some - the list of suppliers in the spares section of the forum would be a good starting point.
I think from memory the code you want is BG35; the standard firenza / magnum disc is BG34.
An alternative is to use the 2.8 capri vented disc and space the calipers, I haven't done this but with a little measuring / design work and machining it should be possible.
Hope that helps
cheers
Ian