Page 1 of 1

Marking register read

PostPosted: Wed Aug 24, 2011 2:03 pm
by shamm
Yo Paul,

Any chance of a button to mark all the register message read, I use the read unread messages option and when the register has had a major update I have to go into each section to clear them.
A nice button on the main page to clear the whole section would be neat!

Anytime you have a spare moment :D

Steve.

Re: Marking register read

PostPosted: Wed Aug 24, 2011 5:41 pm
by pbottomley
you mean you haven't seen the "mark forums read" button ?????

If that doesn't suit you then alas no can do fella....Get back to stroking the dog and wrapping up the parts I want and posting them....

Re: Marking register read

PostPosted: Wed Aug 24, 2011 6:01 pm
by shamm
Am I meant to be posting you something else then ?

Re: Marking register read

PostPosted: Wed Aug 24, 2011 9:37 pm
by pbottomley
YES... I sent you a message saying I want the STD big end bearings you have.. drop me a PM ref costs and postage for them, and I am still after the smallest Main bearings I can get if you have any.... :D

Re: Marking register read

PostPosted: Wed Aug 24, 2011 10:57 pm
by shamm
Let me have a look and see what mains I have here, did not see a msg about ends, they are still here waiting for you!
Will let you know tomorrow what mains I have and what sizes.

Steve.