Viva and magnum parts

[droopsnoot]

Time you got that estate fixed up Mike then you could fetch stuff without a problem

Ah, but then I won't need the bits any more. It's that estate they're for, though I'll end up with a spare set.

[droopsnoot]

Here is what im up against, lots and lots of scrap, a leaky garage roof and lots of wet parts. The stuff that was on the rack and in the sheds are OK but many containers are like these

Wow, that's a lot of water.

And here is what was donated to the land pirates

I see about £20 if you'd taken it to the scrapyard and weighed it in, it's hard to tell from the photo but once you start sticking cranks and flywheels in there the weight goes up. Certain that wasn't a 2.5 or 2.6 stroker crank, or a HPF lightened flywheel? That's always my nightmare with scrapping stuff.

I'll PM you about the doors, will need some decent photos.

[psl]

Could of been anything, issue is most stuff very rusty, wet or rotten........ shame but I cant store big heavy rusty stuff no one will want because its not shiny or new

[karatekidjay]

Alright mate. Dont suppose you have a magnum 1.8 fuel sender and a drivers side sealed head lamp?
Cheers jamie

[psl]

Have loads of sealed lamps, but need to know the correct marking to distinguish the right one for your car. As for fuel sender, alas no

[meltdown]

Hi There

Do you happen to have a water control valve, (i think that's what it's called) sits on the bulkhead and heats the interior up on cold days - or in my case makes you melt on hot ones!

Also if you or anyone can help my friend in obtaining a front offside hightop wing or arch repair panel.
After several years being off the road this is the only part stopping the car being MOT'd

Cheers
Nick

[mactat2]

Hi, PM'd you about a few bits
cheers
Mac

[psl]

Hi, PM'd you about a few bits
cheers
Mac

Not received your pm

[mactat2]

Strange, i'll try again now
Thanks for letting me know

[cooperman]

hi, do you still have the rostyle nuts? if so could you post them to wolverhampton?
thanks, marcus