by shamm » Tue May 16, 2006 7:18 pm
My car slows down from 80 ok, and I imagine my HC is alot heavier than your car.
The servo's are around but I would not call them common, the 2300 one is a bit larger than the 1256 type but they both do the same job and you can't tell the difference when driving.
I will be doing this job soon as the MOT is looming, will have to make a tool to open the servo up but once inside it should be simple-ish providing nothing falls apart.
P.S.
Did you blank of the vacuum feed from the engine, otherwise the hose acts as a vacuum leak.
Steve.
Steve Hammond
Two 2.3 Viva's, one 2.3 Viva Estate, one 2.3 Magnum estate, half share in a 1.6 Viva auto, and no time (HC183)