Meet Honey.

This is an area for discussion about Restoration issues.

Re: Meet Honey.

Postby rizzo » Sat Dec 31, 2016 11:24 pm

Best way is to cut all the rot out, did all that on mine, have a look here viewtopic.php?f=23&t=22316 you may find some answers :D
HB 1159 1968 10K White
HB 4000 1968 Green
User avatar
rizzo
Brabham Viva
Brabham Viva
 
Posts: 910
Joined: Sun Nov 09, 2008 10:43 pm
Location: North Yorks

Re: Meet Honey.

Postby Kraken » Sun Jan 01, 2017 2:01 pm

Thanks Bill, useful pics there. It's hard to see which bits of metal are which section when it's all rusty so it's good to see some clean metal. Paul's mod to allow coilovers is food for thought too... :goodideasign:
User avatar
Kraken
Brabham Viva
Brabham Viva
 
Posts: 791
Joined: Thu Jul 10, 2014 11:01 pm
Location: Aberdeenshire

Re: Meet Honey.

Postby yoeddynz » Wed Feb 08, 2017 10:58 am

Wow!!!! :shock: That is rot all right! Far out- when you finish restoring this I'll post you a beer!!!!
yoeddynz
Brabham Viva
Brabham Viva
 
Posts: 707
Joined: Fri Oct 12, 2007 2:47 pm
Location: South Island, New Zealand

Re: Meet Honey.

Postby Kraken » Sun Apr 09, 2017 10:21 pm

yoeddynz wrote:Wow!!!! :shock: That is rot all right! Far out- when you finish restoring this I'll post you a beer!!!!

I think I'll need something stronger than that!

Picked up a new toy...

and started the most important part of the car, the spare wheel well...
User avatar
Kraken
Brabham Viva
Brabham Viva
 
Posts: 791
Joined: Thu Jul 10, 2014 11:01 pm
Location: Aberdeenshire

Re: Meet Honey.

Postby Kraken » Wed May 03, 2017 9:55 pm

Well chuffed with this little panel I made. Still needs a slightly fettle though.
Attachments
User avatar
Kraken
Brabham Viva
Brabham Viva
 
Posts: 791
Joined: Thu Jul 10, 2014 11:01 pm
Location: Aberdeenshire

Re: Meet Honey.

Postby Kraken » Sat Dec 02, 2017 8:40 pm

Progress is slow for numerous reasons.

Thought it was about time I posted a few pictures though!
Attachments
User avatar
Kraken
Brabham Viva
Brabham Viva
 
Posts: 791
Joined: Thu Jul 10, 2014 11:01 pm
Location: Aberdeenshire

Re: Meet Honey.

Postby lord13 » Sun Dec 03, 2017 8:37 am

Looking good :)
Image
lord13
Brabham Viva
Brabham Viva
 
Posts: 538
Joined: Wed Sep 28, 2011 8:46 pm
Location: ***CLASSIFIED***

Re: Meet Honey.

Postby rizzo » Sun Dec 03, 2017 7:46 pm

Nice to see your still hard at it, good stuff :D
HB 1159 1968 10K White
HB 4000 1968 Green
User avatar
rizzo
Brabham Viva
Brabham Viva
 
Posts: 910
Joined: Sun Nov 09, 2008 10:43 pm
Location: North Yorks

Re: Meet Honey.

Postby Kraken » Fri Feb 02, 2018 4:44 pm

Rear nearside inner arch is cleaned up and some of the welding done.


Most of the boot floor is welded now too.
User avatar
Kraken
Brabham Viva
Brabham Viva
 
Posts: 791
Joined: Thu Jul 10, 2014 11:01 pm
Location: Aberdeenshire

Re: Meet Honey.

Postby Kraken » Fri Feb 02, 2018 4:49 pm

And a big milestone, finally managed to the driver's door off!

The first pin puller I made couldn't cope, it was made from m10 rod. It snapped in half.



I made a second one out of m12 and it also struggled... It would just bend. I got hold of some MAPP gas though and that combined with the puller I made eventually got the first pin out! The bottom pin came about half way out, and then hammered out using a 6" nail. Door off finally!



Which meant I could get the wing off properly too:

User avatar
Kraken
Brabham Viva
Brabham Viva
 
Posts: 791
Joined: Thu Jul 10, 2014 11:01 pm
Location: Aberdeenshire

PreviousNext

Return to Restoration

Who is online

Users browsing this forum: No registered users and 7 guests