In my bags of parts is one side's worth of bushings and washers.
![Image](https://farm5.staticflickr.com/4454/37440734350_db98833397_z.jpg)
These are the rubber bushings that seem to have a "ring" in the middle almost as though they were intended to be a grommet for a larger hole.
They correspond to this diagram:
![Image](https://farm5.staticflickr.com/4458/37027853273_2a9c25040a_z.jpg)
curiously it also corresponds to this diagram:
![Image](https://farm5.staticflickr.com/4490/36988281694_39ab092641_z.jpg)
and this one
![Image](https://farm5.staticflickr.com/4480/37027852533_26b56f9907_z.jpg)
except that if you look closely you will see that the first diagram has no washers between the two bushings while the second and third picture show one on the top of the car body hole.
Needless to say I have none of these bushings.
![Sad :(](./images/smilies/icon_sad.gif)
This picture is the set that came with the shocks themselves (as a separate kit)
![Image](https://farm5.staticflickr.com/4460/37027854763_03c1d65a0a_z.jpg)
you can see the diagram here:
![Image](https://farm5.staticflickr.com/4478/37698579861_6e7e01759e_z.jpg)
On the other hand my diligent previous owner seems to have amassed another set shown here:
![Image](https://farm5.staticflickr.com/4505/37666113232_9a3b946880_z.jpg)
so, what to do? I can cobble things together, I can, well, I can do as I'm told. I am a little concerned with a metal to metal connection around the hole in the car body - but basically need wisdom,
thanks all!
JP